Hard maple
set of 6 · $16/hold
Deep, friendly incuts patterned after the first holds Caleb ever grabbed. Warm-up jugs that make a home wall feel generous instead of punishing.
- Set of 6
- Incut 30–40mm
- Bolt-on, hardware included
- Hand-oiled finish
The shop
Wooden climbing holds, boards, and one-offs. Straight off the bench.
Product photography is being shot; until then, the wood species tells you most of what you need to know. Prints and small workshop goods are joining the shelf soon, and custom requests are always open. Ask about a piece.
Wooden climbing hold sets
Small-batch wooden climbing hold sets, $7–20 per hold depending on wood and shaping time. Made to order; expect two to three weeks on the bench.
Black walnut
Valley Crimps
$120
set of 8 · $15/hold
Eight precision edges in four depths, 8–20mm, with a rounded radius that spares your pulleys and a grain that gets prettier with chalk.
- Set of 8 · four depths
- 8 / 12 / 15 / 20mm
- Screw-on
- Skin-friendly radius
White oak
set of 4 · $18/hold
Sculpted pinch blocks that taper like water-worn stone. Set them wide for compression circuits or stack them on a system wall.
- Set of 4
- Two widths
- Bolt-on
- Burnished, no lacquer
European beech
set of 3 · $18/hold
Three broad domes at 30°, 35°, and 40°. Wooden slopers demand honest body tension. These teach it without shredding skin.
- Set of 3
- 30° / 35° / 40°
- Bolt-on
- Raw sanded 220-grit
Hangboards & training boards
Custom wood hangboards and training boards from $100, built to your wall and your fingers. Custom edge depths on request.
Walnut or maple
The Ledge
from $100
A custom wood hangboard with two edge rows, a jug rail, and depths cut to your fingers. The same board Caleb trains on. The one that hung over his hospital bed came first.
- 24″ × 7″
- Edge rows 15 + 20mm (custom on request)
- Jug top rail
- Mounting hardware included
Baltic birch + hardwood holds
Ridgeline System Board
from $350
A full home training board, sized to your wall and stocked with Ridgespine wooden climbing holds. Includes a setup consult with Caleb: angles, spacing, and a starter circuit.
- Sized to your space
- Hold kit included
- Setup consult with Caleb
- Freight or local pickup
Burl one-of-ones
Burl features. Nature makes the pattern exactly once; each piece is signed, numbered, and never repeated.
Claro walnut burlOne of oneSold
Burl grows where a tree heals. The grain knots into a pattern that has never existed before and never will again. Cut once, shaped once, gone.
- One of one
- Sloper / feature
- Bolt-on
- Signed & numbered
Oregon maple burlOne of one
A swirl-figured maple burl shaped into a two-hand feature. Photograph coming; the wood is already on the bench. Nature made the pattern, and it only gets made into a hold once.
- One of one
- Two-hand feature
- Bolt-on
- Signed & numbered